Email format error
Email cannot be empty
Email already exists
6-20 characters(letters plus numbers only)
The password is inconsistent
Email format error
Email cannot be empty
Email does not exist
6-20 characters(letters plus numbers only)
The password is inconsistent
The grease gun's base is simple to use and has a short stroke for usage in small locations. A maximum working pressure of 7000 psi makes it simple to inject clean grease into confined spaces.
YT-07043 Grease Gun
For simplicity, the base of the grease gun is detachable and has a short stroke for use in confined spaces. With a maximum working pressure of 7000 psi, injecting clean grease into tight locations is a breeze.
The features of YT-07043 Grease Gun
All oil and air are propelled to the top by a reinforced spring. The maximum working pressure of 7000 PSI is guaranteed by a high-pressure-resistant O-ring, which also prevents grease leakage. Air is easily loaded and exhausted thanks to a special iron die-cast head and air release valve. Attention! When using it for the first time, make sure the air is exhausted!
Including non-slip rubber sleeves, a T-handle, and cold-drawn steel canisters make it simple to implement the four loading techniques of the cartridge, bulk, suction, and filling pump loading. Attention! To avoid harm, don't remove the grease gun's bottom screw. To avoid wasting grease after lubrication, pull back the T-handle at all times!
has a flexible shaft with a 10,000 PSI rating to make lubrication safer and easier. Its operating flexibility is increased by its length. Most difficult-to-reach grease zerk fittings can be gripped with extended elbows and straights. Attention! While attaching the flexible shaft and extension tube, tighten using a wrench.
Application - Compatible with the majority of vehicles, including tractors, recreational vehicles (RVs), cars, PTO axles, steering cylinders, universal joints, suspension tie rods, ball joints, lawnmowers, chassis, and driveshafts.
100% sale support - We offer a 6-month warranty on all products and 24-hour, quick-response customer assistance that is free of any hassles. Sincere appreciation for your assistance with YATO!
Important - the moment the nozzle needs to be removed from the zerk fitting. To effortlessly remove the nozzle, please follow the procedures below. 1. Slightly loosen the hose or nozzle (this step unloads the kept pressure in the hose or nozzle) 2. Remove the nozzle from the zerk fitting in step two.
